The Waverly cold trap condenser chillers are a special type of cold trap with far more cooling power and collection capacity (they are actually more similar to freeze dryers). They are industrial grade 'condenser chillers' specially designed for solvent removal applications. The Waverly cold trap baths serve two primary purposes: 1) to prevent liquids/oils from transferring between pump and vacuum oven and 2) to collect/save all condensed vapors for later use. Most cold traps are small and just designed for keeping out contaminants but Waverly's uniquely deisgned cold traps not only keep out contaminants but they also serve as a condenser to re-collect all evaporates.
A cold trap is a device that condnses all vapors except the permanent gasses into a liquid or solid. The most common objective is to prevent vapors from being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying or solvent removal applications.
The Waverly cold trap condenser chillers are a special type of cold trap with far more cooling power and collection capacity (they are actually more similar to freeze dryers). They are industrial grade 'condenser chillers' specially designed for solvent removal applications. The Waverly cold trap baths serve two primary purposes: to prevent liquids/oils from transferring between pump and vacuum oven and to collect/save all condensed vapors for later use. Most cold traps are small and just designed for keeping out contaminants but Waverly's uniquely deisgned cold traps not only keep out contaminants but they also serve as a condenser to re-collect all evaporates.
|
|||||
Model | VCT40 | VCT80 | |||
Temp Range | -40°C to Ambient | -80°C to Ambient | |||
Cooling Capacity (at -20C) |
833W | 833W | |||
Trap Volume | 3 x 300mL glass traps (900mL) | 3 x 300mL glass traps (900mL) | |||
Reservoir | 3.5L (stainless steel) | 3.5L (stainless steel) | |||
Cooling Coil (inside reservoir) |
Stainless Steel | Stainless Steel | |||
Trap | Pyrex * 3pcs | Pyrex * 3pcs | |||
Temp Control | PID Digital | PID Digital | |||
Dimensions Internal (WxDxH) |
180Øx210H(mm) 709Øx8.27H(inch) |
180Øx210H(mm) 709Øx8.27H(inch) |
|||
Dimensions External (WxDxH) |
465x560x710(mm) 18.18x22.04x27.95(inch) |
465x560x710(mm) 18.18x22.04x27.95(inch) |
|||
Shipping Dimensions (WxDxH) |
|||||
Net Weight | 43 kg | 43 kg | |||
Shipping Weight | 69 kg | 69kg | |||
Material Internal | Stainless Steel | Stainless Steel | |||
Material External | Steel Plate with Powder Heating Coat |
Steel Plate with Powder Heating Coat |
|||
Material Packing | Silicon Rubber Packing | Silicon Rubber Packing | |||
Electrical Requirement | 110V, 60 Hz | 110V, 60 Hz |